ZH2 OEM mirror mount caps 3D print model

these are caps I designed for closing off the mounts for the OEM mirrors on the ZH2. The design is inspired by the H2 logo that's on any H2 bike. I recommend using a resin printer to print these files. I used an Elegoo saturn to print the one you see me holding in my hand. I designed two types of caps. 1: just the H2 logo as a cap;2: The H2 logo with the text supercharged on the side of the cap.

both designs have a indent on the sides that allows you to easely take them off when you want/ need to.

If you buy the files you will get bouth designs.

Please keep in mind that I scaled them to be the as tight as i wanted them to be on my bike. I wanted to use a tiny amount of ductape to press them in so i dont get resin dust in the threat of the mount. If you want them to fit without tape I'd scale them up by 1% or 1.5%.

OnceOnce buy the files you have the right to print these files for personal use only. Please don't sell or share the files or the fysical print without my permission!