SRT Logo for Bumper whit LED Two Avaiable Versions 3D print model

3D MODEL DESCRIPTIONHello friend, today on my profile, I wanted to bring a fantastic logo, made at the request of a friend of mine, the SRT logo to apply the LEDs on the back, cover it with the appropriate cover that I made, pierce the back frame to pass the cables that will power the LEDs.

The logo was designed to be applied to the front of the car, precisely on the bumper grille.

The logo has two versions, the first you can print the piece with multi color printer, the second, allows you to print the project in several pieces, so you can assemble it.

If you can’t find your favorite logo, contact me in the messages section, I will be happy to make it and publish it on my profile.

I also want to remind you that almost all my projects are interlocking, and have a tolerance ranging from 0.35 to 0.50mm, depending on the project I go to work, I apply the right tolerance tolerance standard of all printersIf you, like many others, don’t know what tolerance your printer has, I suggest you download my tolerance test, you can find it on my profile.

As always I want to thank you for spending your time viewing my project, and if you find it interesting, I suggest you take a look at my cults profile, because you will find a lot of interesting projects, and I’m sure you’ll find something that will do for you, I also remind you to leave me a like if you appreciate my work and follow me.

Good print my friends for anything, contact me via messages.

3D PRINTING SETTINGSLayer 0.15 / 0.20Temp 205° / 50° PLA --- 230° / 65° PETGInfill 10%Top and Bottom Layer 4Perimeter Layer 3Speed 50/60 mm/s