I have not seen any STL files out there for the SCX24 Gladiator yet so I decided to design my own. They are mounted using some of the stock screws and holes and are made to compatible with rock sliders. I am using these: https://www.thingiverse.com/thing:5255778I have also included a fender version to be used with my stinger bumper that is made to clear Emax/Ecopower servos.You may need to trim the fenders slightly as each body is not mounted perfectly centered from the factory. I also needed to remove my esc from the mounting plate and move it about 2mm backwards for the power switch to clear the passenger side fender. I used Priline TPU for mine which is perfect for these. You will need to trim these if you also use my Halo LED mount.