Printable diorama toolbox scale 1-9 to 1-24 3D print model

An open toolbox suitable for dioramas.The model is pre-made in scale 1/9, 1/12, 1/14 and 1/24.

The length is approx1/9 = 52mm / 2 inches1/12 = 39 mm / 1.5 inches1/14 = 33 mm / 1.3 inches1/24 = 20 mm / 0.8 inch

Which equates to a large toolbox.In scale 1/24, printing can be problematic. Here, it is recommended to print slowly and in thin layers.The walls are relatively thin. In scale 1/12, the walls are 0.8 mm. The model has been tested with 0.4 mm walls, but had some warp in the two lids. The model is subsequently reinforced a little, so the result will be better. Even in 1/24.

This project is an open project.More models may be added to this collection. Feel free to suggest more things. send a message