Plastic canister for engine oil A and AK 1L 3D print model

Before buying my model, please familiarize yourself with its parameters in detail.According to the technical specifications, the neck of the canister is 38 mm, and should be adjacent to one of the sides. On the opposite side from the neck, make an imitation of the handle. Supplement the handle with an ornament from a car tire. On the side of the handle, on the side surface, place a scale for approximately measuring the oil level in the canister. There are depressions for stickers at the front and back.I made the model for the subsequent manufacture of an injection mold.Therefore, the project is filled with Parasolid files.Before making the injection mold, the model was printed on a 3D printer. The project was supplemented with the _stl file. (A - canister without a lid - 226000, AK - canister with a lid - 432000).Later, the designers asked to model the lid. I made a model with a lid and am posting 3D max files. Average polygonality.Volume 1 liter. Height without a lid 223 mm.