Indian Challenger Speaker frame 3D print model

This is the part that is mounted around the speaker, and the protective mesh rests on it. I disassembled the original part and 3D scanned it. I processed and prepared the scanned CAD model for 3D printing. It printed very easily with minimal support. It fit perfectly, as if it were the original. The pins where the fastening clips are mounted are designed to be drilled after printing for more precise installation. If desired, the installation can be done with mounting adhesive or silicone. You will get and the mirror copy too.

Do not use PLA. I recommend PETG, ASA, ABS, or other materials that are resistant to temperature and UV rays. Use supports!