Crawler V303 4x4 - 1-10 RC body 3D print model

PLEASE make sure your 3D printer is able to print a minimum size of 220x250x158mm. before purchasing.

The Crawler V303 is pure utilitarian. Whether it is for hauling cargo or passengers, this van will go practically anywhere.

It’s designed specifically to fit on SCX10 ii, SCX10 iii, VS4-10 Pro, and TRX4 chassis with a standard short wheelbase of 290mm, outer tyre to tyre width of 230mm and maximum tyre height of 110mm.

Feel free to check out our custom build here: https://www.aheadrc.com/v303

The short wheelbase makes it a very nimble and capable crawler with lots of all around ground clearance, especially when accurately paired with portal axles.Size comparisons of the V303 4x4 and Bog 406 are shown in the photos and renders above, please note that the Bog 406 is sold separately.

Similar to our other body shells mounting the body to the chassis is made easy with the included body mounts, which are designed beefy, trail worthy, and with fore and aft adjustments.

We’ve gone with the traditional route and packed a ton of functional features and details in this design.

• All 5 doors have in-built function hinges, so no need to source your own hinges.
• Roof hatch can also be opened with the included hinges.
• Windshield can be flipped up or down just like in real life.
• Front bumper towing recovery pin
• Rear bumper towing hook.
• High clearance version of the rear bumper is included (without the hook and hook mount.)
• All light buckets are functional, use 5mm and 3mm LEDs.
• Interior door panels with handles.
• Sidesteps.
• Detailed exhaust system.
• Spare tyre carrier.
• Included fuel can and carrier.
• Detailed interior dashboard.

Please ensure your printer can print a volume of 220x250x158mm.

It is highly recommended to read the instruction manual before purchasing, to ensure you have all the required tools and hardware to assemble this body.

Assembly instructions:View the link below to download the assembly instructionshttps://www.aheadrc.com/manual

Should you need any help, please do not hesitate to contact us!

FDM printing:

Requires a printer that can print a minimum volume of: 220x250x158mm.

PLA+ filament0.2mm-0.3mm (0.4mm nozzle) layer heights20-30% infill densitySupports are necessary

Finished and assembled size:525*218*177mm (All parts assembled excluding mirrors)