Autonomus - Hydrogen Fuel Cell Concept Car 3D print model

Easy-to-print car model kit in scale 1:43 for self assemblyFDM 3D-printable with standard settings

Attention! Steel axles with a diameter of 1 mm need to be ordered separately!

Print settings:Print settings depends on your printer.For this model TPU plastic was used for tires and PLA for all other parts

Recommended 0.4 mm nozzle 0.2 mm layer height

Assembly notes:

• Remove supports accurately
• Drill all holes with 1 mm hand drill
• Use 1.2 mm drill for axle holes in car body
• Cut the axles in this length: 4x15 mm (side doors); 3x39 mm (roof doors); 2x38 mm (wheels); 2x5mm (front door)
• Assembly all doors and parts together. Don't bend the axles!
• Glue the windows and tank door on the car body