This original 1/10 scale arc welder comes in 2 versions. Logo and non logo.

Both versions have 3 parts to them. The handle standalone, the body standalone, and handle and body combined. The standalone handle and body will require some assembly with super glue (just glue on the handle to the body). The handle can be mounted in any angle preferred.

The combined version does not require any assembly, but may be harder to print and recommended for more experienced individuals. The handle on this version is rigid, and does not rotate.

As the “1/10” scale is more of a loose standard, feel free to scale up or down in your slicer to fit your own rig, if necessary.

Same with all of our other print files, it is highly recommended to print only with a resin printer to achieve the maximum amount of details, and do remember to wear PPE.

Post processing is the same with our other products. Use a spray primer depending on your resin type, then either spray paint or hand paint with model paints to your own liking. Top it off with thin coats of UV-proof clear spray. To get the logo’s background to a different colour, it is recommended to first spray a layer of your desired paint, then hand paint the rest. Remember to spray UV-proof clear coats at the end. Feel free to use the renderings as an inspiration for your colour schemes!