All new Tamiya TT01 RWD drift conversion kit stage 2 3D print model

Tamiya TT01, which has been lying around at home for a long time or was purchased for its beautiful body but neglected due to its ambiguous performance, is being reborn.Everything(including main chassis) needed for high qulity RWD conversion has been modified.This is Stage-2 conversionFront motor, rack & slide steering, beil drive.Because reality is important in RC Drift, the installation of interior parts was applied from the early design stage.The design of the interior parts has been completed. It will be uploaded separately later.

Necessary parts

M3 washer-2pc

M3 nut-66pcs

M3 nylon nut-8pc

M3 5mm set screw-11pcs

M3 countersunk bolt

6mm-1pcs, 8mm-20pc, 10mm-24pcs, 12mm-4pcs, 16mm-15pcs, 28mm-2pcs, 34mm-2pcs, 38mm-4pcs, 42mm-2pcs

M3 wrench bolt

6mm-4pcs, 8mm-4pc, 10mm-6pcs, 12mm-3pcs, 15mm-16pcs, 18mm-8pcs, 20mm-2pcs, 30mm-6pcs

M2countersunk bolt

4mm-12pcs, 6mm-2pcs, 8mm-6pcs, 10mm-4pcs

M2 nut-12pcs

inner 5mm, outer 8mm, thickness 2.5mm bearing-4pcs

inner 3mm, outer 9mm, thickness 4.0mm bearing-3pcs

https://www.aliexpress.com/item/1005003936265564.html?spm=a2g0o.order_detail.order_detail_item.7.dcf55ccdfw4V6H

inner 3mm, outer 8mm, thickness 3.0mm flange bearing-2pcs

https://www.aliexpress.com/item/1005001322776241.html?spm=a2g0o.order_detail.order_detail_item.3.34555ccdXkt6SD

1150 bearing(TT01 stock)-10pcs

1280 bearing(TT01 stock)-4pcs

dia 15mm, thickness 3mm magnet-4pcs

https://www.aliexpress.com/item/1005004276902194.html?spm=a2g0o.order_list.order_list_main.28.171c1802Yf76KU

5mm shaft-cut to use

86mm-1pc, 33mm-1pc, 15mm-1pc

3mm shaft-cut to use

47mm-29cs, 40mm-4pc, 35mm-2pcs, 32mm-2pcs, 22mm-2pcs

https://www.aliexpress.com/item/1005005477259278.html?spm=a2g0o.productlist.main.3.519917ecLC8Vtn&algo_pvid=866457d2-ffe3-4bf0-949f-7befe50e21c6&aem_p4p_detail=202311191020141880971777455260001596605&algo_exp_id=866457d2-ffe3-4bf0-949f-7befe50e21c6-1&pdp_npi=4%40dis%21USD%211.95%211.31%21%21%2114.03%21%21%402103244417004180136834017e981d%2112000033239843707%21sea%21KR%21186590808%21&curPageLogUid=T4q7MN43deYg&search_p4p_id=202311191020141880971777455260001596605_2

3M 87mm(29t) belt-2pcs

https://www.aliexpress.com/item/1005005935127676.html?spm=a2g0o.order_list.order_list_main.329.2a861802F7t6QA

universal joint 5mm-2pcs

https://www.aliexpress.com/item/4000194793728.html?spm=a2g0o.order_list.order_list_main.738.2a861802F7t6QA

4.8mm joint ballend & cap- 10set

Necessary tools

M2, M3 Hex wrench

Drill - 2.0, 2.7, 3.0, 3.1, 4.0mm

M3 tapping tool

Plus driver

File, knife, saw....etc.

Necessary RC partsTransmitter, receiverLi-po(2s 3000~5000mah)batteryGyro