Wednesday Addams Cat Suit - Pre-abbembled Action figure 3D print model

3D model description

Wednesday Addams (Jenna Ortega ) Cat Suit versionWednesday wearing Cat suit pre-assembled Action Figure also available in multicolor and with supports.

IMPORTANT: Print laying down

Included in the package:Multi color Designs :1x Design in multicolor1x Design with a 16cm and a 13cm design in angle adjusted for adding manual supports for printing for better face detail and color.1x Design with a 16cm and a 13cm design in angle adjusted for adding manual supports for printing for better face detail and color with supports.

1x Design for resin pre supported.1x Original Design

3D printing settings3D printing settings

ResinLayer height 0.04/0.05lift: 4son my mono x 6ks i used 1.7 exp time but this depends on the printer you are using. do not over expose.also do not use clear resin.

FDM:suggested layer height for multicolor print mainly. Layer height 0.08 for more accurate color painting in eyes and smoothness. (0.12 is good also, you can print in 0.2 also but i suggest below 0.2 for higher detail and more accuracy)add supports

Brimsupports you can use both the tree and the normalinfill i used 15%wall thickness at least 1.2 for durability.