Unicorn pull along toy 3D print model

This is a unicorn pulling toy. A fun toy for toddlers and preschoolers.

Dimensions 190 x 155 x 64 mm. Easy to print and assemble.

Printed on Creality K1C printer, using PLA+ without supports and brim, with a height of 0.08 mm.

Print 4 wheels, 2 axles, 2 hemispheres and 2 sphere cylinders.

Use superglue on the threads of the two 12 mm axles and screw the wheels on the axles.

Use the two 6 mm cylinders to align the two hemispheres when gluing them together with superglue.

While the parts are printing, you can cut out the paper print. Set the colorprinter print settings to actual size. It took me about half an hour to cut out the print and glue it to the unicorn. Use paper glue to glue it on. I gave the paper print a thin layer of water-based varnish so that the unicorn is easy to clean with water. Use a soft string that is approximately 5 x 700 mm in your preferred color and tie it securely to the unicorn and sphere.

OR you can paint the unicorn yourself in your preferred design and colors.

All designs by Moller Design are protected by copyright law. By purchasing, you do NOT have the right to sell any digital files or printed models of my designs without my explicit written consent.