Step By Step Countdown 3D print model

3D MODEL DESCRIPTIONGetting ready for Christmas requires a lot of steps.● This STL file is recommended for FDM Printers!● 3D Printing Time Based on Ender 3: 01 Day, 03 Hours, 52 Minutes (will vary accord to you printermodel)● Approximately Height: 34 cm3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)● Line Width/ Nozzle: 0.4 mm● First Layer Line Width: 0.48 mm / 120%● Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) | 20 mm/s (First Layer) / 500 mm/s(All the other layers on Bambu Lab)● Recommended Initial Layer Height: 0.16 mm● Recommended Layer Height: 0.16 mm● Recommended Perimeters/ Walls: 3.● Recommended Infill (%): 10% (Gyroid)● Needs Support: No.● Build Plate Adhesion: Brim (Only on “Handrails” file).The parameters above are recommendations made by our staff; if you prefer, you can adapt themaccording to your preferences.Happy Printing!