Steel Cage - compatible with WWE Superstars Ring - awesome model 3D print model

Are you ready!

If you want to be the Best Dad in the World! and your kids love WWE then 100% print this! - my son literally saw it and turned to me and that - made me feel awesome!

It fits the WWE Superstars ring (the one that has the canvas that bounces up and down), but you are free to modify the files to make them fit any other ring you want too

I spent days and day perfecting the sizing and fit and I am so glad I did, it looks freakin awesome and is so simple to assemble and reassemble (for easy storage) + once built it is really strong too

It can be 75% assembled too so leaving a side open or not putting the top half of a side on which means the kids can still access it to have fun… (it can still be fully played with built of course… it is worth highlight that it just doesn't have to be :)

Has a functioning door, flaf 'top' rails so that your Superstar figures can stand atop ready to launch in to the ring

I recommend that you use a large printer for this, as the rails are 30cm tall (probably a good idea to print with a 'raft' too

The strength using PLA and fine and that is with ZERO infill, yep literally no infill is required

You are gonna bring joy to some kids 100% (or yourself if you are a big kid)

You will need to have a 3d Printer that can manage at least either the X/Y at 30cm prints, or the Z that can manage 30cm prints

_Enjoy_

Note: I intend to build an attachable 'Hell in a Cell' section and will give that away for FREE to all purchasers of this model

Instructions:

Print 4 x WWE_End-Bottom Corner Clip.stlPrint 4 x WWE - Corner Bar (top ropes) complete.stlPrint 4 x WWE - Middle Bar - Complete.stlPrint 4 x WWE - Top Rail.stlPrint 15 x WWE - Fence with Lattice V3 test.stlPrint 1 x WWE - Bottom Door Entrance.stlPrint 1 x WWE - Door.stl

To assemble

1. Connect the 4 End_Bottom Corner clips in the inside of each corner (they'll clip in place)
2. Connect the 4 Corner Bars to each each corner on the top rope section
3. Slide 2 Steel Cage fences either side of a Middle Rail
4. Then slide the 2 Steel Cage fences into the Top Corner rails (one each side of the rail5 Repeat for all 4 sides (the only difference is the side where you will put the Door Entrance, but same method applies
5. Add the top hald Steel Cage fences
6. Add the Top Rail to each of the 4 sides - the is deliberately some tension here so that it forces strength along all 4 sides of the Steel Cage
7. Apply the Steel Door - the Steel Door will latch nicely on the Door Entrance

Enjoy