STAR WARS BOBA FETTS BLASTER 3D print model

This 3D Printed prop replica is inspired by the video game Lego Star Wars. It can be used as a prop or as a decorative piece.

I would greatly appreciate if you only use this file for personal use only.

The Blaster: 8inches Tall (203.2mm)The Barrel: 8' inches Tall (203.2mm)

3D PRINTING SETTINGSPLA Print Setting:

(BARREL).6 mm NozzleLayer Height: .03Infill Density: 20%Print Nozzle Temp: 210Bed Temp: 60Print Speed:20.00Wall Speed: 15.00Initial Layer Speed: 12.00Build Plate Adhesion: BrimSupport Interface Density: 55%Support Roof Density: 55%Support Floor Density: 55%

(BLASTER).6 mm NozzleLayer Height: .03Infill Density: 20%Print Nozzle Temp: 210Bed Temp: 60Print Speed:20.00Wall Speed: 15.00Initial Layer Speed: 12.00Build Plate Adhesion: noneTree SupportsSupport Interface Density: 55%Support Roof Density: 55%Support Floor Density: 55%

PETG Print Setting:

(BARREL).6 mm NozzleLayer Height: .03Infill Density: 20%Print Nozzle Temp: 230-240Bed Temp: 80Print Speed:20.00Wall Speed: 15.00Initial Layer Speed: 12.00Build Plate Adhesion:noneSupport Interface Density: 55%Support Roof Density: 55%Support Floor Density: 55%

(BLASTER).6 mm NozzleLayer Height: .03Infill Density: 20%Print Nozzle Temp: 230-240Bed Temp: 80Print Speed:20.00Wall Speed: 15.00Initial Layer Speed: 12.00Build Plate Adhesion: noneTree SupportsSupport Interface Density: 55%Support Roof Density: 55%Support Floor Density: 55%