Velociraptor with stalking pose jurassic park 3D print model

Jurassic Park, Velociraptor, dinosaur with a watchful pose Velociraptor dinosaur designed to a personal taste, it has thick skin texture and thin skin, the legs its texture is a little more detailed more in the nails simulating the tear. The velociraptor was divided into several parts since it was printed small and it is difficult to remove the supports, so I decided to cut it. The way of printing is in the photo as I place the body, the head is in the same way with the teeth up, and the arms are being printed with the nails up so that they do not use various supports. The photos of the other pieces are pending and I'm going to paint it so you can see the result, wait to see how it turns out. I remind you that it was divided into parts so that you can print it more reliably, and avoid mistakes and spoil material and the second reason is so that if you like it you can print it in a larger size The size I decided on is 15 cm high but you can scale it to 200% or 300% or whatever size your 3d printer accepts.

The important parameters are Quality for the body and tail are 0.16 and the detail looks good Head and arms 0.1 for better detail walls 5 top and bottom: 5 support: tree personally is easier to take off from the connection points with the piece. speed: the slower the better between 30 and 40 but I tried 45 and it turned out great adherence I always put 5 of edge so that it adheres better and I put a little hair spray just on the arms and tail, head.

velociraptor, dinosaur, jurassic park, impression, detail, texture, skin, claws, pronounced claws, ferocious, pose.