Garbage Scow from Transformers G1 Episode Surprise Party 3D print model

Almost a direct opposite to the Iconic Ships, here's a pretty obscure ship from G1 episode 'Surprise Party'!

And here it is all printed out and painted up, with its hijacker pilot Wheelie alongside it.

For our build here, we opted to leave the windscreen a separately removeable piece, so it allows bots to be placed into the cockpit more easily and also so they can be seen better with it removed.

Unlike other vehicles done up so far, this scow is kind of unique in that it both needed a rear door as well as a pair of doors on the base which open up to drop off its load. Load up all them effect parts or accessories which you're going to be carting off to the dump site, hover in place over the drop or dumping zone and release the payload!

As always, 5mm ports have been added on the underside of the boosters to allow blast effects to be added on for it hovering mode or in the pair of thrusters!

== Assembly ==

With the size of this build, it's clearer to separate the assembly instructions into two portions included here.

Here's the exploded assembly for the front cab first, where any parts indicated in red are the provided 3d printable pegs to be used, and parts color-coded blue are 1.75mm filament bits used as alignment pins or detailing.

For the windscreen and windows, it is recommended to print them in clear filament and maybe use a spot of clear blue paint for them.

===

Well, this is a pretty large build so definitely take a bunch of patience to get it all put together! But you'll get a nifty scow to have your bots zoom around in! Have fun 3d printing as always! =)

===

This model is not to be uploaded or sold in any form and is intended for personal use only.

Check out more of what we are up to over at our Facebook Page (http://www.facebook.com/FunbieStudios) or website (http://www.FunbieStudios.com/)

Support us on Patreon - https://www.patreon.com/FunbieStudios | Full listing of Models - https://funbiestudios.com/model-catalog