Fantastic little project for anyone with an idle machine and leftover or filament samples.At merely 34 grams per rocket (PLA), this is cool, very easy to build and tremendous fun to fly.There is also enough room in the nose cone for a small payload or basic avionics.A few tips;

• Print this in vase mode without top and bottom layers
• Single wall
• Print engine with 10-15% infill
• Glue shock cord to the inside of the nose cone and upper body far enough inside not to interfere with the connecting ring.
• The rocket is very light so a small parachute or stremer should be enough for recovery.Make sure to use wadding and aluminum foil to protect the rocket from the heat caused by the parchute deployment charge.This is the product of several attempts but by far the most succesful and we will upload more as we develop and test.Enjoy and PLEASE make sure to follow local rules and laws governing the use and launch of model rockets.Few of our recent launches...https://www.instagram.com/p/CNR7ivrgCLV/https://www.instagram.com/p/CMuC95YgXkp/https://www.instagram.com/p/CMJ8IkcgsPH/Thank you