Concrete mixer truck toy fully 3D printable 3D print model

Fully printable - no support - no glue - single color 3D printer

This is a concrete mixer truck toy.

The tolerance for pieces that need to fit tightly is 0.1mm,for pieces that need to allow movement (like screws and axles) 0.3mm or more.

Printing list: Nb. STL file name rezolution support colour (my make)

• 2x axle_back.stl 0.16mm no gray
• 1x axle_front.stl 0.16mm no blue
• 1x back_funnel.stl 0.12mm no yellow
• 2x back_light.stl 0.16mm no orange
• 2x back_light.stl 0.16mm no red
• 1x backhead.stl 0.12mm no black-white
  
• 1x base_dist.stl 0.16mm no gray
• 1x base_left.stl 0.16mm no gray
• 1x base_right.stl 0.16mm no gray
• 1x cabin_with_support.stl 0.16mm no yellow
• 0x cabin_your_own_support.stl 0.16mm yes yellow
• 1x cabin_cap.stl 0.16mm no blue
• 4x cap_double_rim.stl 0.12mm no black
• 2x cap_single_rim.stl 0.12mm no white
• 1x exhaust.stl 0.16mm no black
• 1x front_grill.stl 0.12mm no black-white-black
• 1x front_lights.stl 0.12mm no orange-white
• 1x interieur.stl 0.16mm no gray
• 1x interieur_base.stl 0.16mm no orange
• 1x mirrors 0.12mm no black(TPU)
• 1x mixer_wall_wider.stl 0.28mm no yellow-blue
• 4x rim_double.stl 0.16mm no white
  
• 2x rim_single.stl 0.16mm no white
  
• 2x roof_light.stl 0.16mm no orange
• 1x screw_gear_knob.stl 0.16mm no black
• 6x screw_l9mm.stl 0.16mm no several
• 12x screw_l13mm.stl 0.16mm no several
  
• 0x sleeping_screw_l9mm.stl 0.16mm no several
  
• 0x sleeping_screw_l13mm.stl 0.16mm no several
  
• 1x steering_wheel.stl 0.16mm no black
• 1x support_mixer_back.stl 0.16mm no blue
• 1x support_mixer_front_left.stl 0.16mm no blue
• 1x support_mixer_front_right.stl 0.16mm no blue
• 6x tire_outter_cut.stl 0.16mm no black
• 4x tire_simple.stl 0.16mm no black
• 1x tool_box_left.stl 0.16mm no blue
• 1x tool_box_right.stl 0.16mm no blue
• 1x water_tank_left.stl 0.16mm no orange
• 1x water_tank_right.stl 0.16mm no orange
• 1x wheel_house_back_left.stl 0.16mm no black
• 1x wheel_house_back_right.stl 0.16mm no black
• 1x wheel_house_front_left.stl 0.16mm no black
• 1x wheel_house_front_right.stl 0.16mm no black

Observations:

• all objects already have the intended print direction in the STL files!
• if you don't like the built in supports for the cabin,then you can find only the cabin in cabin_your_own_support.stl
• most of the parts were printed with PLA. only the tires andthe mirrors were printed from TPU (flexible material)
• there is narrow and a wide mixer parts, chose the one you like
• screws... there are also sleeping screws STLs includedthese are printed on the side which makes them a lot strongerthe drawback is that these don't close the holes completely...So use only as many sleeping screws if the toy is going to be played with, and only normal/round ones otherwise