Borderlands 3 Breath of the Dying 3D print model

Here is a 3d model digital download of the Breath of the Dying from Borderlands 3.

The Breath of the Dying was printed on Ender 3 machine in PLA+.

Terms of use also included in download:These files are not for resale and only to be used by the person purchasing the item. These are not to be posted on other sites. For use only by the person purchasing.

Print list:

Barrel:BarrelGrip.stl - 1BarrelCapCoverBack.stl - 1BarrelCapCoverFront.stl - 1BarrelCover.stl - 1BarrelGripAttachment.stl - 1MiddleBarrelBack.stl - 1MiddleBarrelFront.stl - 1

Details:BodyDial.stl - 2DialPeg.stl - 2MainBodyBoxR.stl - 1MainBodyBoxL.stl - 1Trigger.stl - 1

Handle:Handle.stl - 1PipeBodyAttachment.stl - 1Pipe.stl - 1

Main Body:BackBodyTriggerGrip.stl - 1BodyButt.stl - 1FrontBody.stl - 1StockButt.stl - 1StockTop.stl - 1TopTube.stl - 1BackMainBody.stl - 1

Scope:ScopeBack.stl - 1ScopeBase.stl - 1ScopeFront.stl - 1ScopePin.stl - 1

Pegs:BodyPegs.stl - 11

Assembly:With this model I glued up the barrel and main body in 2 separate pieces and painted. I did this to use spray paint since the prop is 2 main colors of a dark green and a light green. If you do this I think it would be easier to just glue all up and mask off the areas.

Handle assembly for movement:I also did not glue in the handle all the way so it can move. The handle comes in 3 pieces. The handle mount, the post and the handle. If you would like to do this glue the small handle mount into the body, then slide the post into the mount, but don't use any glue. Then place the handle on the other end of the post. Now you can paint and both joints will still move freely.

The prop measures 26in long, 12in high, 5 in wide not counting the handle.

Breath of the Dying Paints

Primer

• Rust-oleum - flat black - Home Depot

Paints

• Rust-oleum - green apple as my base - from Home Depot
• Rust-oleum - hunter green - Home Depot
• Craftsmart - green tart - Michaels
• DecoArt - Aloe- Michaels-Craftsmart - crisp green - Michaels
• FolkArt - Lemon Michaels

Cell shading

• White acrylic
• Black acrylic

Finishing

• Satin spray polyurethane - Home Depot

Here is a video on assembly and how I painted it. - https://www.youtube.com/watch?v=Zo1DBBoUUq8

If you have any questions on assembly or painting feel free to reach out!

This item is created and modeled by me and inspired by the Borderlands franchise.