Borderlands 2 Krieg Rampage Axe 3D print model

I'VE GOT A HUGE HAND!!! And now a huge axe! This is the rage monster Krieg's rampage buzz axe 3d digital download.

This is a full size prop coming in at a rough 35 inches once assembled.

Terms of use 2023

These files are not for resale and only to be used by the person purchasing the item.These files are meant for personal projects and not meant to be printed for others that have not purchased the files themselves. These are not to be posted on other sites. For use only by the person purchasing.

Print list:

StaffTop.stl - 1Middle.stl - 1Base.stl - 1handlePeg.stl - 2

Head:headBackL.stl - 1headBackR.stl - 1headBaseBottomL.stl - 1headBaseBottomR.stl - 1headBaseTopL.stl - 1headBaseTopR.stl - 1headFrontL.stl - 1headFrontR.stl - 1headPeg.stl - 12

Canister:Canister.stl - 1CanisterArm.stl - 1CanisterArm2.stl - 1canisterBracket.stl - 1

Dynamite:DynamiteStickL.stl - 1DynamiteStickR.stl - 1DynamiteStickWick1L.stl - 1DynamiteStickWick1R.stl - 1DynamiteStickWick2L.stl - 1DynamiteStickWick2R.stl - 1DynamiteStickWick3L.stl - 1DynamiteStickWick3R.stl - 1

Blade:bladeNut1.stl - 8bladeNut2.stl - 8MegaBlade.stl - 8MegaBladePeg.stl - 8BoltCap.stl - 1dynamiteBase.stl - 1DynamiteBolt.stl - 1DynamiteBoltWick.stl - 1leftBlade.stl - 1rightBlade.stl - 1BladePeg.stl - 2

Here are some notes on printing:I printed the first one with 20% infill on all parts. This made the head heavier than the staff and a bit hard to hold. If you want to keep in balenced, I print the staff at 40% and the head parts at 10%. This ratio is roughly the same amount of filament and will feel balenced with the cost of the head being a bit under in structure. You can always play with this to get it perfect for you :)

Here are some notes on assembling:

To start I glue the three sections of the staff together and glue the blades. These are very strait forward, but sometimes don't meet up 100% flush. If they don't you can always add some Bondo, epoxy, super glue, wood putty, drywall putty... to close the gap. I used super glue to glue together and some drywall putty for the gap. This model has some other parts that get attached to the blades. Once the main blade is glued you can add the mega blades and the nuts.

The axe head is the similar, I assemble the left and right just by gluing the posts in the holes. Once dried, I glue the left and right side together and clamp the base and the back for a firm hold.

The canister has 2 arms that need to be glued.

Now that the staff, the head and blade are assembled we can move to painting. Paint as you see fit. I have videos describing in detail how to assemble and paint below. Paint the assembled staff, head, blade and dynamite pieces separate. Once painted the final assembly can happen.

Finish with some coats of polyurethane and if you want to do a wash now would be the time. After the wash do another coat or two of poly.

Here is a video on how to assemble and how I painted the axe.https://www.youtube.com/watch?v=G0jb61PLWkw

If you have any questions on assembly or painting feel free to reach out!

This item is created and modeled by me and inspired by the Borderlands franchise.