Difficult Sliding puzzle toy with a cute fantasy bunny 3D print model

Design ConceptThis sliding toy puzzle is inspired by cute and whimsical popular eastern characters, tailored to resemble a playful rabbit in an enchanting field of grass with its easter egg.

Intended UseThe model serves as a decorative item but it is also a sliding puzzle game! Suitable for nursery rooms, children's spaces, or anyone who enjoys playful designs featuring animals! This puzzle is very difficult to solve but super easy to print: print-in-place and multicolor ready!

Printing RecommendationsIt is recommended to print the model using a multicolor printer or to use anacrylic marker to color the rabbit (to capture the vivid contrast between the frame and the design). Consider using PLA for ease of printing and vibrant color representation! Single color is very cute too.

Assembly InstructionsNo assembly required!! Once printed, it can be immediately utilized as a decorative piece or employed as a charming room accessory.

YAS! you are going to download the complete single piece ready to print and use also with only 1 color but if you want to print it multicolor or to modify something you can use the separated parts (3 more files easy to edit and multicolor ready).

Quick Trick:

if you've made a mistake and your blocks aren't moving:

Start bending the puzzle forcefully; you'll hear cracks, indicating weak points splitting. Weak points are those areas in the design that are intended to be empty spaces but fused due to a printing error, which often occurs with small sizes.

If the opposite issue arises, where the filament shrinks more than expected during the printing, print a narrower frame and forcefully fit the pieces inside. Alternatively, use it resting on a table, allowing the pieces to slide on a surface. The next time print it smaller or bigger! Or tag me and share your gcode and print parameters with me :)

My printing parameters:

with K1 Max, Creality Print and CR Hyper PLA:

Printing time: 1h49m.

Material Wt: 26.77g.

NO SUPPORTS.

No post production.

No brim, no build plate adhesion types.

Speed: 300mm/s.

Infill density: 15% or less.

Layer: 0.1mm.

Temp: 220°C.

Plate: 45°C.

You can use it also as a Lithophane Lamp: slice it to make it thin and use a different infill with an higher density value.

Print & Sell

COMMERCIAL USE:

You can sell renders and 3D prints for commercial use.

You can't distribute the digital 3D model files.