Hogwarts Legacy Wand Natural 3D print model

3D model of Hogwarts Legacy Wand (Whole/Halves) Natural. This model is a fan-made replica of the wand from the Hogwarts Legacy game. Files contain whole wand + wand halves + halves screw (STL).

Although a single print is typically enough, you might want to consider printing the screw in multiple copies and choose the one that prints the best for a good fit between the two wand halves.

SCALE At 100% scale, the wand is approx. 305 mm / 12 inches long But you can scale the model according to your needs

This fan-made model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic.

PRINTING SETTINGS We recommend a layer height of 0.05 to 0.2 mm on FDM printers. All parts are aligned to the printing platform for easy manipulation. Most of the parts need minimal or no use of printing supports to save printing time and filament. Printing settings will vary greatly depending on your specific printer.

Do you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.