Herta Hammer - Honkai Star Rail - Herta Cosplay 3D print model

This is an Exact Replica for Herta's Hammer from the video game Honkai: Star Rail. Professionally designed for high accuracy cosplaying and easy 3D Printing. Perfect for your Herta Cosplay.

Please message me if you would like a prop that is not yet listed from this genre or any other genre.

ITEM DIMENSIONS

• Length: 1500 mm (5 feet) and 1830mm (6 feet) [Standard]
• Custom Dimensions (for example for a smaller doll or figurine or to match your height better) [Upon Request]

3D PRINT BED DIMENSIONS

• Length: 200mm ( 8) | Width: 200 mm (8) | Height: 200 mm (8") [Standard]
• Length: 150mm ( 6) | Width: 150 mm (6) | Height: 150 mm (6") [Upon Request]
• Length: 129 mm ( 5) | Width: 60 mm (2.3) | Height: 150 mm (6") [Upon Request]
• Custom Dimensions [Upon Request]

3D FILE DETAILS

There are 4.25 mm (for 4mm or 5/32" wooden dowels) dowel slots to help align each piece during gluing and provide additional structural stiffness and support.

There are 13.5 mm (for 12.5mm or 1/2" wooden dowels) dowel slots to help align each piece during gluing and provide additional structural stiffness and support.

There is 20 mm (for 3/4" or 19mm wooden dowels) dowel slots to help align each piece during gluing and provide additional structural stiffness and support.

The 20mm dowel also acts as part of the hammer model and should be 4 feet long to create a 5 foot tall hammer. You can shorter or lengthen this dowel to change the overall length of the hammer if you want.

For the 6 foot scale hammer, 16.5 mm (for 16mm dowels or 5/8dowels) dowel slots and a 23mm dowel slot (7/8 or 22mm dowel) are used instead.

3D PRINTING RECOMMENDATIONS

I strongly recommend using PLA+ filament. I also recommend using 3 perimeter walls and 5% hexagonal infill.

3D PRINTED KIT DETAILS

Parts are printed in white PLA+ filament with scaffolding supports removed.

CONTACT AND MISCELLANEOUS

I did my best to position the seams to be hidden easily or easily sandable. I also positioned the slices to allow for preservation of the fine model details when you 3D print the pieces.

Please message me if you have any questions before or after your purchase and I will be happy to help! Let me know if there is a specific prop or weapon you want a 3D model of and I can likely make it for you.