1/3
Simple to use replacement treads for your tank conversion project. It can be made to fit the Reman Luss or Khimera chassis. Parts are a one-for-one replacement for plastic treads.15mm size is 50% wider than those included with the plastic kit (10mm to 15mm).12.5mm is 25% wider than those included with the plastic kit.10mm is the same width as the original kit.There are also spacers used to widen the section of the hull where the tracks attach. These are only needed for the 12.5mm and 15mm tracks. Some other accessories or parts may not be compatible (like track guards)
15mm tracks will increases the width of the tank by 10mm (less than 1/2 inch).12.5mm tracks will increases the width of the tank by 5mm (less than 1/4 inch).
Kit includes Spacers for the Reman Luss and Khimera chassis along with various lengths of track for each kit. Other parts and accessories show in the images are NOT included.
You will need the following for a Reman Luss
8x spacers to extend the width of tracks (12.5 adn 15mm only)10x single tracks (replaces parts 'L6' and 'R6' from the plastic kit)2x four-track sections (replaces parts 'L5' and 'R5' from the plastic kit)2x six-track sections (replaces parts 'L4' and 'R4' from the plastic kit)2x twelve-track sections (replaces parts 'L3' and 'R3' from the plastic kit)2x compressed eight-track sections (replaces parts 'L1' and 'R1' from the plastic kit)2x stretched eight-track sections (replaces parts 'L2' and 'R2' from the plastic kit)
You will need the following for a Khimera
4x spacer A and 4x space B to extend the width of tracks (12.5 adn 15mm only)12x single tracks4x two-track sections4x four-track sections4x twelve-track sections
Notes on assemblyHalf-eagle: mirror the tracks to get a left and right set.Reman Luss: Each Spacer has a small cut-out to fit the text molded onto the part from the plastic kit. See images folder for placement.
Khimera: There are two types of spacer. See images folder for placement.
Copyright TinyPanzerStudio
