Gondorian Soldier Spear LotR 3D print model

IMPORTANT: This 3D model is intended FOR PERSONAL USE ONLY. You cannot sell/donate/transfer it to third parties, make changes to this 3D model and sell/transfer/donate to third parties a modified 3D model under your own authorship. If you want to sell items printed or otherwise made using this 3D model, then for such cases on my Patreon marrion3d there is a subscription level Hand of Malenia which allows you to sell items printed or otherwise made using this 3D model under my authorship. For any questions - contact me in private messages.

Spear dimensions: shaft length - 30.6x2030mm blade length - 650mm

There are 4 versions of the spear: -smooth uncut -detailed uncut -smooth cut into several parts -detailed cut into several parts

In the uncut version, there is only a separation of the blade from the handle; at the junction there is a connecting groove. In the cut version, everything is divided for ease of printing on printers with a print area of 200x200x200mm. Accordingly, if you chose the cut version, then after printing you should glue all the parts together using special matching grooves on the parts. Also in the cut version there are holes for the rod, they are in both the shaft (for rod 20x2000mm) and in the blade (for rod 5x550mm).

If you wish, you can replace the shaft with a pipe, since the tip of the spear has a hole for a pipe with a diameter of 25mm. In this case, at the junction there will not be an even transition from the tip to the pipe, but with a “step”. If you take a pipe that matches the diameter of the shaft and connect the pipe to the tip of the spear with some kind of insert, then the transition will be smooth. choose what is convenient for you :)