PRINT IN PLACE CUTE FLEXI HIPPOGRIFF 3D print model

PRINT IN PLACE CUTE FLEXI HIPPOGRIFF ARTICULATED

Hey everyone! How are you all doing? Today, I have a special design to share with you, which I believe you will absolutely love. Without any further ado,So guys, today I present to you the Flexi Hippogriff.Without further delay, get your printers ready as soon as possible and print out our new design. Then share it on social media and don't forget to tag us.

A Hippogriff is a mythical creature with the front half of an eagle and the hind half of a horse. It is known for its speed, strength, and the ability to fly. The hippogriff symbolizes the union of opposites and often appears in literature and folklore.

This design is a print-in-place model, requiring no support structures, which means you can print it seamlessly without any additional support. You have the flexibility to print the head, wings, and body separately. Later, you can assemble these parts together. This design is going to be an absolute favorite among all of you!

It's an articulated print-in-place model that needs NO supports, No assembly, and prints great with PLA

This Design are really fun to play with because they flop around and move in any which way.

Feel free to Share your Makes and tag me on Social Networks if you print it!

ALL Toonz Factory designs are protected by Copyright Law. When you purchase, you do NOT have the right to sell any digital file or printed model of my designs without my explicit written consent.

To legally sell them, you may obtain my permission through Patreon

Thanks for your support, you guys are the best! ;)

3D printing settingsMake sure you have good adhesion for the wings.

You can scale this design to as small as 60% scale. Do not print it smaller than this scale. For printing at a smaller scale, make use of a brim or raft while printing the wings and head. Be cautious that the filament you're using is not brittle, as the wings could break. While attaching the wings to the body after printing, do it carefully.

If you feel the head is too tight, you can increase its size by 1 or 2%.

If you prefer the wings to be a bit looser, you can decrease the wing scale by 1 or 2%, allowing them to fit more loosely.

When inserting the wings into the body, they might seem a bit tight, but they will fit properly into the sockets. Apply a little force to insert the wings into the head socket securely.

Bambu Slicer Settings

Layer Height :- 0.16 mm

Wall Count:- 2

Infill Pattern :- Gyroid

Infill:- 15%

Rest As Defaults