Heavily Inspired by StarCraft 2's Terran Orbital Drop pod, This model has several uses.It is perfect for most 28mm tabletop games that may or may not have the word Hammer in them,and suitable for even hell divers 28mm figs - as long as the base is 28mm

Perfect for collectors and gamers, this detailed model is a must-have for any enthusiast.

Key Features:

• Flaps Open: Has a twist mechanism that Opens the flaps when it enters orbit.
• Drops 28mm Figs: Has an Iris/Aperture mechanism that directly drops your 28mm figure on the table.
• Has the Option to be loaded from the middle (see file Top and Bot)
• Can also be loaded with D20 Dice and be used as a dice tower or dice shaker?
• Accurate Design: Faithfully replicates the in-game drop pod, it can even spew just one marine at a time.
• Customizable: Put your colors!
• Perfect for Display: It's perfect for tabletop games as a way to deliver your troops and a terrain piece afterward.

FAIR WARNING:This file comes with 2 types of build:

1.)FLAPS WITH MECHANISM: it's a more advanced and complicated Build and is only advised for makers not afraid to get frustrated. The mechanism to align the pinion to the racks takes skill anddepends on the quality/tolerance of your printer. (some sanding may be required)

2.)FLAPS NO MECHANISM: Simpler build where the flaps can open manually orbe glued in place. In all versions, the flaps need to be free to swivelif you want to have the Flap have more friction, I suggest to print them (just the flap)2-3% Smaller so the hole will also shrink (Disclaimer: I have not tried this)

BOTH files come with the iris mechanism that allows you to drop any 28mm Figure onyour wargaming table. Alternately it can be used as a dice tower of sorts by placingyour dice inside, shaking them, and using the mechanism to spews them out.

Dimensions:

• Height: 110mm
• Drop pod Hole Diameter: 30mm - Perfect for 28mm base figure

What's in the file:all files needed to print 1 x 3D Printed Orbital Drop Pod

What you will need:6pcs 10mm(length)x 3mm(diameter) Metal rods (or welding rod) for the flaps to freely swivelOptional: Magnets to keep the flaps closed

Attribution:Iris Mechanism was modified from ZIPPITYBOOMBA under CC-BY

If you want to sell this design as a 3d printJoin my Patreon:https://patreon.com/janyap88