medival boardgame similar to can t stop 3D print model

Heading to a medieval event and you're afraid it's going to be boring or you need an excuse for drinking a lot? For the rules of this game search can't stop rules with your prefered search engine.

To make the board easier to print and transport, it is divided into four parts and is mounted with sliding bolts on the bottom. Each of the four parts of the board is printed in two parts and then glued. This way you save filament and printing time. The two larger parts of the board are 170.35x207mm and can be printed on almost any filament printer. If not, you can also print the model 10% smaller, the bolts at the bottom of the board will work despite smaller gaps. The picture shows the board printed with wood filament (20% wood): .6 nozzle and .2 layer thickness.

For the game you need each quarter (board and frame) once. You also need 8x lock, 3x runner and all the other figures 11 times. Not included as an stl file are the 4 dice you'll need for the game.I recommend you to paint the lower edge of the figures so that they are better recognisable.

As a trained goldsmith with years of experience in 3D design, I work with great care. If something does not fit, please feel free to contact me. And if you are happy with the model leave me a happy little comment. I'm very happy to see your printed version, feel free to post on instagram (@sarahcadschmid) or email me.

If my designs inspire you contact me for your personal ideas.