A miniature and stylish case, printed on a 3D printer. An excellent solution for a portable media station. Suitable for mini-ITX motherboards. The difference from similar cases is that the power supply is located inside the case, as well as good cooling (when using processors with TDP 65Watt and an additional cooler 50x50mm at the bottom of the case). Allowable height of the CPU cooler is up to 67mm. The format of the power supply: flex-ATX (150x82x41mm). Hard disk format 2.5 inches. Working area not less than 200x200x100mm. Total printing time from 18-28 hours. Estimated weight at filling 25% about 320g(pla). Mounting is done with neodymium magnets. The magnets are fixed with epoxy glue. Requires 4 to 6 magnets (3x1 - 3x3 mm). Ideal for ryzen 3 2200g with a boxed cooler.