Robust support for mounting 1 or 2 Graphic cards outside the cabinet for mining, exhibition, ventilation, or space purposes.

Both Graphic card and Risers are supported on a flat surface, allowing the use of screws for a more complete fixation (list of screws below). This avoids the long-term consequences of 24/7 vibrations: heating of the contact region and even fire.

You can mount this support with up to 3 fans (120mm)! Save your graphic card fans, the lower the temperature, the longer your equipment lasts.

Keep everything organized! If you have more than two graphic cards, you can still connect one support to the other by the side docking system, joining them completely using a screw.

The bottom has space to stick silicone or rubber feet.

Designed to be printed in either PLA or ABS. ABS is recommended depending on the operation temperature.

No support required.Assembling tutorial:https://www.youtube.com/watch?v=oftSA5VmKog&ab_channel=3DTROOP

List of screws:-> Fixing the graphic card: 2x M3.5-12mm-> Fixing the riser support to the main support: 1x M4x12mm-> Union between two supports: 1x M4x12mm-> Fixing the Risers on the support: 8x M3x16mmReference for silicone feet: 3M Scotch Bumpers 8mm x 8mm x 2.5mm

Please feel free to share the images of your print in your setup, that would be great!

This is a personal use license, if you want to sell the printed parts from this design in your region, please get in contact.

Don't forget to hit like and follow us! Every week we will be posting new models for you!

3D PRINTING SETTINGSDimensions(mm):209,9 x 180,0 x 134mmLayer heigh: 0,2mmWalls: 2Infill: 15%Material: PLA or ABSNo support required.Base speed: 50mm/sPrinting time: ~10h 27min