FINGER GUARD 3D print model

A system to apply an anti-contamination protocol for your finger.

It is an assembly that includes a tip to be positioned at your fingertip and a cap to confine the part in contact with the external elements.

Very useful for typing a code on a keyboard or simply to press an intercom...

Protocol :

First, simply mount the cap on the tip to isolate the touching part and thread it onto your finger.

then, when you want to press something, remove the cap and touch with the small end, reposition the cap to confine the contaminated part.

Renewable operation, because the cap encloses the touching part.

After the use, which can be multiple, you can disinfect the whole thing.

A ring is available to adjust the scale to your size.

unsupported printable

Other projects :

https://www.cgtrader.com/Fabricejeanpier

Follow

https://twitter.com/fabricejeanpier

3D PRINTING SETTINGSunsupported

Extruder: 200°C and bed: 55 ° C

Layer height: 0.2 mm

Vertical hulls, perimeter: 3

Horizontal hulls, solid roof: 3 and below: 3

Filling density: 20%.

Speed perimeter: 30 mm / s