Spy X Family Bond Forger Keychain 3D print model

This print requires assembly and glue. Ideally it should be printed in 2 separate colors as indicated.

The hole in Bond's head is 0.4 centimeters in diameter.

A cute recreation of Bond Forger from the hit manga and anime series Spy X Family. In the show, Bond Forger is a big cute dog adopted by the family at Anya's insistence. He has the ability to see into the future. This keychain is printed in five parts. Four of them are in black, and the base (Bond's head, named BondForger_Base) is in white. The 3MF files are labelled respectively. Do note that depending on the strength of the glue you use, be careful about using it as an open keychain as his eyes, nose, and bowtie may fall off.

Print the base in white. Print the following in black

• BondForger_Bowtie
• BondForger_EyeLeft
• BondForger_EyeRight
• BondForger_Nose

My example pictured was printed in generic black and white PLA at 0.20 mm. The white base used almost 14 grams of filament and took 49 minutes to print. The black parts used slightly over a gram of filament and took 8 minutes to print. I assembeled the final keychain using cyanoacrylate glue (superglue). You can use the final top-view orthographic image as a reference to align the black glued-on pieces.

Comes as an OBJ, FBX, STL file. Source Blender file included. Included 3MF file was made in PrusaSlicer. I recommend printing in PLA. No supports needed.

Approx. size-

• W: ~74.5mm
• B: ~70.5mm
• H: ~10mm