Jeep Stand Logo and Keychain 3D print model

3D MODEL DESCRIPTIONHello friends, today I wanted to bring on my profile a logo much loved by my friends who make off-road, the classic logo of the Jeep, with a cute keychain.

Dimensions Logo: 200 x 20 x 90 mmDimensions Keychain: 100 x 5 x 43

Everything is modular and you have the possibility if you do not have a multicolor printer, to print every single piece of the color that interests you, and then assemble it.

If you don’t find one of the logos you love in my profile, contact me in the message section, I will be happy to work on it, and post it here on my profile.

I also want to remind you that almost all my projects are interlocking, and have a tolerance ranging from 0.35 to 0.50mm, depending on the project I go to work, I apply the right tolerance tolerance standard of all printersIf you, like many others, don’t know what tolerance your printer has, I suggest you download my tolerance test, you can find it on my profile.

As always I want to thank you for spending your time viewing my project, and if you find it interesting, I suggest you take a look at my cults profile, because you will find a lot of interesting projects, and I’m sure you’ll find something that will do for you, I also remind you to leave me a like if you appreciate my work and follow me.

3D PRINTING SETTINGSLayer 0.10 or 0.15Temp 205° / 50° PLA - 230° / 65° PETGInfill 10%Top and Bottom Layer 5Perimeter Layer 3Speed 50/60 mm/s