GTA London Edition Stand Logo 3D print model

3D MODEL DESCRIPTIONHello friend, today on my profile I brought an iconic logo, in the gaming world, at least for older people like me.

The GTA London Edition Logo measures 160 x 123 x 30, the base measures 140 x 45 x 37.5.

The base must be printed with 10% infill, instead the retsante of the pieces to 5%, the supports must be put only to the frame, are very few, and if you respect the settings, which you find in the photo section, you will get a fantastic result.

The whole is interlocking, and has a tolerance of 0.50mm for each piece that fits, I recommend printing it with various colors of PLA, so by doing, you will go to avoid coloring the pieces, and you will get a magnificent result, if you want to print the white piece, with PLA Fluo, so when the lights are off it will light up, giving a beautiful effect.

Soon I’ll be profiling all the logos of the world-famous Grand Theft Auto.

I also want to remind you that almost all my projects are interlocking, and have a tolerance ranging from 0.35 to 0.50mm, depending on the project I go to work, I apply the right tolerance tolerance standard of all printersIf you, like many others, don’t know what tolerance your printer has, I suggest you download my tolerance test, you can find it on my profile.

As always I want to thank you for spending your time viewing my project, and if you find it interesting, I suggest you take a look at my cults profile, because you will find a lot of interesting projects, and I’m sure you’ll find something that will do for you, I also remind you to leave me a like if you appreciate my work and follow me.

Good press friend for anything, contact me via messages.

3D PRINTING SETTINGSLayer 0.15 / 0.20Temp 205° / 50° PLA --- 230° / 65° PETGInfill 10%Top and Bottom Layer 4Perimeter Layer 3Support View PicturesSpeed 50/60 mm/s