Dodge SRT Big Logo Two Version With Led 3D print model

3D MODEL DESCRIPTIONHello friend, today on my profile I carry the beautiful logo of the Dodge SRT, very large, and with the possibility of inserting LEDs behind, to illuminate the writing.

The picture you see on my profile, is of a dear friend of mine, who printed it, as well as his request.

NB: There are two versions available in the file you will download, the one with grafts and the one without grafts, then there are the full letters, and the empty ones

If you like some logo, or you have any request, contact me in the messages section, I answer quickly and I also realize in good times.

I also want to remind you that almost all my projects are interlocking, and have a tolerance ranging from 0.35 to 0.50mm, depending on the project I go to work, I apply the right tolerance tolerance standard of all printersIf you, like many others, don’t know what tolerance your printer has, I suggest you download my tolerance test, you can find it on my profile.

As always I want to thank you for spending your time viewing my project, and if you find it interesting, I suggest you take a look at my cults profile, because you will find a lot of interesting projects, and I’m sure you’ll find something that will do for you, I also remind you to leave me a like if you appreciate my work and follow me.

Good press friend for anything, contact me via messages.

3D PRINTING SETTINGSLayer 0.15 / 0.20Temp 205° / 50° PLA --- 230° / 65° PETGInfill 10%Top and Bottom Layer 4Perimeter Layer 3No supportSpeed 50/60 mm/s