Batman Big Logo 1 Meter with RGB 3D print model

3D MODEL DESCRIPTIONHi friends, today on my profile, I wanted to bring a logo that I love to madness, the beautiful batman logo.

The logo is designed to be assembled, as it measures 1 meter wide.

the pieces are divided into 200 mm x 200 mm pieces, so as to facilitate the work even to those who have a small print surface.

The LEDs to be associated with the logo are 1 cm thick and are 3 meters long, take a look at the photos.

To follow, I will also bring other logos always large to assemble, with the possibility of inserting the LED strips on the back.

The logo was designed to save as much as possible the filament, but having a good yield and above all beautiful and light, so you can glue the logo to the wall using double-sided adhesive paper, but since I also thought of the lovers of nails, I inserted joints to the project, so you can hang it if you want to put hooks on the wall.

If you don’t find one of the logos you love in my profile, contact me in the message section, I will be happy to work on it, and post it here on my profile.

I also want to remind you that almost all my projects are interlocking, and have a tolerance ranging from 0.35 to 0.50mm, depending on the project I go to work, I apply the right tolerance tolerance standard of all printersIf you, like many others, don’t know what tolerance your printer has, I suggest you download my tolerance test, you can find it on my profile.

As always I want to thank you for spending your time viewing my project, and if you find it interesting, I suggest you take a look at my cults profile, because you will find a lot of interesting projects, and I’m sure you’ll find something that will do for you, I also remind you to leave me a like if you appreciate my work and follow me.

3D PRINTING SETTINGSLayer 0.15 or 0.20Temp 205° / 50° PLA - 230° / 65° PETGInfill 10%Top and Bottom Layer 3Perimeter Layer 2Speed Unlimited