VAMPS 3 SELENE Model ONLY by SPARX 3D print model

The third of a three-group diorama featuring the three sexiest female vampires on the planet.The three models in this set can be connected using the included body parts to form a three figure – no base required diorama.contact me for info . . Alternatively, if you wish to keep each one separate – body parts are included to enable the model to be displayed on its own, including a single model base where necessary.THIS DOWNLOAD ONLY CONTAINS THE SINGLE MODEL SELINE AND IS NOT THE FULL GROUP OF THREE.THIS MODEL CONTAINS NO “ADULT” BODY PARTS These are available as a separate “Adult Add-Ons” file where you downloaded this model. I have made this decision for this and any future models, not to offer NSFW files with the basic model and have the NSFW parts available in a separate download. This allows more people to view my models without having to view pictures of the alternative parts.I hope you all understand my reasons for doing this in future releases.

If you are printing the model to “connect” to the other models in the set then use the STL files beginning “C_???????.stl” e.g. C_Group_Head2.stlIf you are printing the model as a single stand alone model then use the STL files beginning “S_???????.stl e.g. S_Single_Head1.stlSelene’s head IS NOT INTERCHANGABLE as the head is a connection piece to Vampirella body.The model is1/6 scale at H185 x W200 x L190. This model does not require a base.2 upper torso’s options1 x lower torso2 x boots2 x arm options for connection or stand alone model11 parts in total.I SHARE MY WORK FOR OTHERS TO ENJOY. . .PLEASE DO NOT SHARE THESE FILES ON SOCIAL MEDIA OR OTHER WEBSITES. LINKS TO THIS PAGE ARE ACCEPTEDAll parts are cut files to fit build plate of small resin printers like the Photon or have separate files than the FDM versions included.These orientations work for FDM printing but you may find a better orientation that reduces support.All the parts have been printed and developed to print, A lot of prints have been produced to get the figures corrected and fault free.Why cut into many smaller parts I have been asked?

1. If you try and assemble this, then paint it . .it would be difficult to paint into hidden areas, less masking when painting separate parts.
2. Smaller parts not only allow for Resin print at full scale, but also allow individual parts to use less supports than one larger part on FDM printersSo now you know!Please do not scale down or adjust my recommended settings for infill etc. . . as you can see from the pictures this prints very well and I believe you will be pleased with the result when completed.All of my models are only released when they can print! so please do not remix or fix faults in this model then republish! If there is a fault then let me know . . message me I will answer and fix problem. . apart from that print make enjoy.3D PRINTING SETTINGSTIPS:Resin Printing;Heads, torso’s, boots are all hollow 2.40 Raft 95%Arms DO No Hollow Raft 95%All parts on FDM were print tested at 0.12 speed 50ALWAYS dry assemble and “trim” parts prior gluing.You can actually assemble all of Pandemonium except her arms if printing as a group . . add these after connecting Pandemonium to Selene.For own personal use only,no sales of STL or digital files, or model kits created from this model.