Smurfette by SPARX 3D print model

Was commissioned to create a Smurfette inspired by the art of Peter Kondas but with a little more human element. As the commission was a shared commission this model is now available for sale to anyone interested . . This model has variants of her dress and panties. Along with 3 different bases to choose from. A simple four piece model, pinned and/or surface fixing with no interchangeable parts, they will need to be glued.

The model is H276, and 285mm height with base

2 upper torso’s options 2 lower torso options 1 Left Arm 1 head (and head pin) 3 base

10 items in total.

PURCHASE OF THESE FILES DOES NOT ALLOW SELLING STL FILES OR MODELS MADE FROM THE FILES. . . DOWNLOAD IS FOR SINGLE BUYER USE ONLY

I SHARE MY WORK FOR OTHERS TO ENJOY. . .PLEASE DO NOT SHARE THESE FILES ON SOCIAL MEDIA OR OTHER WEBSITES. LINKS TO THIS PAGE ARE ACCEPTED

All parts are cut files to fit build plate of small resin printers like the Photon or have separate files than the FDM versions included. These orientations work for FDM printing but you may find a better orientation that reduces support. All the parts have been printed and developed to print, A lot of prints have been produced to get the figures corrected and fault free.

Why cut into many smaller parts I have been asked?

1. If you try and assemble this, then paint it . .it would be difficult to paint into hidden areas, less masking when painting separate parts.
2. Smaller parts not only allow for Resin print at full scale, but also allow individual parts to use less supports than one larger part on FDM printers So now you know! Please do not scale down or adjust my recommended settings for infill etc. . . as you can see from the pictures this prints very well and I believe you will be pleased with the result when completed. All of my models are only released when they can print! so please do not remix or fix faults in this model then republish! If there is a fault then let me know . . message me I will answer and fix problem. . apart from that print make enjoy.

3D PRINTING SETTINGS NONE OF THE FILES ARE ORIENTATED READY TO PRINT. This will allow you to “join” parts if you have larger printers and wish to do so . .

TIPS: Resin Printing; Hollow 2.40 Raft 100% Lower Torso’s/Legs, Heads, Upper Torso’s

Do not Hollow Raft 100% Left Arm

FDM ALL at 0.16 30% fill, speed 50

ALWAYS dry assemble and “trim” parts prior gluing. The model can be assembled prior painting, no difficult parts to access.