Sentinel Vayne League of Legends 3D print model

3D MODEL DESCRIPTIONWhen you download the product, you will have 14 Stl Files. ( Total 1.3 GB )

FULL PARTS1-Base With Full Figure2- Full Figure No Base3-No Gun Base with Full Figure4-No Gun Full Figure

SLICED PARTS1-Base2- Torso With Head3-Left Arm With Gun4- Right Arm5 - Lower Body With Legs6- Sentinel Gun7- Cloak 18-Cloak 2

BONUS1-Vayne Sentinel Gun2-Vayne Glasses

Suggestion: If you are going to press it at once, a good support setting will be sufficient.If you are going to print in pieces, gluing retouching may give better results.

Note: Base fill must be more than model fill. It is required to prevent it from falling when mounted on the Model Base.If the Sample Base Fill rate is 40%, the Model Fill rate should be between 10 and 30%.

Follow me for more modelsYou can send me a message about the model or in general.You can also reach me via social media.

3D PRINTING SETTINGSPrint Temperature : : 200Table Temperature : 60Layer Height : 0.2 mmIntıal Layer Heigt : 0.2 mmWall Line Count : 0.4 mmFill Density : % 20

Support Settings

Support Stracture : TreeMaximum Branch Angle : 60Branch Diameter : 3Trunk Diameter : 16Branch Diameter Angle : 5Support Placement : EverywherePrefferred Branch Angle : 25Diameter İncrase to Model : 1Minimum Height to Model : 3Intial Layer Diameter : 6Branch Destinty : 20Tip Diameter : 0.8Limit Branch Reach : YesOptimal Branch Range : 30Rest Preference : On Model if RequiredSupport Overhang Angle : 55Support Pattern : GyroidConnect Support Lines : YesSupport Density : 5Support Line Distance : 8Intial Layer Support Line Distance :8Support interface Thicknes : 1.2