Panther Chameleon - Furcifer pardalis V1On Branch for Wall or StandaloneSplit and Full Version on Branch3D ModelHigh-Polygon**

Another Branch (Split Version)is also included as an STL file. This branch can be attached to the wall.

Version of a Panther Chameleon (Furcifer pardalis) as an extra-large 3D print model

Videohttps://youtu.be/aTBA8tWGI04

Contents:24-piece STL version for extra-large FDM printing, including branch (9 parts)1 complete version for smaller prints and resin printers

Additional Branch for the Wall (Split Version)Tree-Wall-CUT1.stlTree-Wall-CUT2.stlTree-Wall-CUT3.stlTree-Wall-CUT4.stlTree-Wall-CUT5.stlTree-Wall-CUT6.stlTree-Wall-CUT7.stl

The cricket can be attached to the tongue with a small magnet. Here is a short video:https://www.youtube.com/watch?v=MBLkfzDC6Sg

The chameleon and the corresponding branch can be connected with four connectors, allowing for precise positioning on the branch.

Some parts of the branch and the chameleon require light tree supports. The two separate arms are best printed with normal linear supports.

Both the branch parts and the chameleon are best glued with low-viscosity superglue (PLA Matt). The preferred printing material is PLA Matt.

License Information:These files are available under the Royalty-Free License. This means that printed or otherwise created versions of this model may not be used or sold for commercial purposes.

Distribution of the STL files is not permitted.

Watermark and Changes:The original STL file and modified versions may not be altered or sold, as they are protected by a digital, invisible watermark.

If you wish to make changes to the model, please contact the designer, Bernhard Queißer, from QU3D in Germany. He is open to dialogue and happy to discuss your modification requests.

Design + Copyright: Bernhard QueißerQU3D.deCountry of Origin: Germany