R
rossaw333 rossaw333
Nice model, printed and went together with no issues.
Useto navigate. Pressescto quit
Meditating Raven Stl Files 3D print model
Description
This statue is composed of 13 parts, which includes 2 switch out heads, and all the files are already scaled to 1:6 scale, assuming the character is around 1.65m/5'4''. Printed at that scale the dimensions of the final assembled piece will be around 150mmx150mmx200mm.
The Printed statue in the images was printed by Panda 3D Printing Studio. If you are interested in their work check them out on facebook: https://www.facebook.com/Panda-3D-Printing-415536632506222/
There is a few alternative versions of some parts, for easy of print in certain conditions, such as spitted versions of the bigger parts and single part versions of the whole thing, one for each head. Note that these alternative parts were not print tested.
If you print this be sure to let me know, i would love to see how it came out! You can at me on Instagram @andrade3d or twitter @thirdpersonphil.
J
johno1961 johno1961
My first completed model. Loved the way it's constructed.
A
astaltw astaltw
Great 3d model of a stylised but kind of realistic too Raven.
Y
yellowsignstudio yellowsignstudio
Nice finish and detail on this kit, printed well on my very inexpensive Creality LD002R resin printer and looks exactly as advertised. I scaled Raven down to 1/10 from the initial 1/6 provided to use as a display piece to match an exist shelf in my grand kids bedroom and I found the pieces did not fit quite right, but this is a reasonable expectation when scaling up or down. A quick bit of X-acto knife work shaving down tabs and slots, and voila! parts fit! Before printing I also fixed a few of the files running them through 3D Builder (MS Windows), then hollowed, holed and made supports for them in PRUSA slicer. You probably have to do this with a lot of files that you acquire anyway... Daughter is painting up her first miniature for her boy's bedroom. Very nice work. Don
T
timwise25 timwise25
My kids and I love the Raven character on Teen Titans Go and this design captured my attention when searching for a Raven model. I printed this in resin hollowing everything except the torso, boots, and cape. The index points are true, and the print looks amazing when printed. I printed this at 122% for a bit larger scale and to ensure a fit on my Photon Mono X bed for the cape. A lot of the support points when angled on the bed can be hidden when this model is fitted together requiring minor sanding before painting. Really great file and hope to start painting it soon.
Tim
Similar Models
to Meditating Raven Stl Files
