Lady Devil May Cry Capcom Female Chracter 3D print model

1-Base 2- Bazooka 3- Full Figure With Base 4-Ful Figure with bazooka 5-Full Figure and Base 6-Full Figure and Base With Bazooka 7-Head With Shoulder ( Sliced ) 8-Torso and Lower All Body ( Sliced )

The model is loaded in 8 different types depending on your printing style. If you wish, you can print it in full form, or you can print it in parts. The model has been designed by examining all the details, and there are no cracks, holes or defects in it. If you encounter any problems with the model, contact me..

3D PRINTING SETTINGS Print Temperature : : 200 Table Temperature : 60 Layer Height : 0.2 mm Intıal Layer Heigt : 0.2 mm Wall Line Count : 0.4 mm Fill Density : % 20

Support Settings

Support Stracture : Tree Maximum Branch Angle : 60 Branch Diameter : 3 Trunk Diameter : 16 Branch Diameter Angle : 5 Support Placement : Everywhere Prefferred Branch Angle : 25 Diameter İncrase to Model : 1 Minimum Height to Model : 3 Intial Layer Diameter : 6 Branch Destinty : 20 Tip Diameter : 0.8 Limit Branch Reach : Yes Optimal Branch Range : 30 Rest Preference : On Model if Required Support Overhang Angle : 55 Support Pattern : Gyroid Connect Support Lines : Yes Support Density : 5 Support Line Distance : 8 Intial Layer Support Line Distance :8 Support interface Thicknes : 1.2

Follow me for more models You can send me a message about the model or in general. You can also reach me via social media.