Jill Valentine - Resident Evil - Collectible Edition 3D print model

When you download you will have 9 Stl Files ( 1.2 GB )

Full Parts

1.Jill Valentine Figure 2.Base 3.Full Body With Base

Disassembled Parts

1.Base Disassembled 2.Torso , Head With Arms Disassembled 3.Hip Disassembled 4.Right Leg Disassembled 5.Left Leg Disassembled 6.Hands With Gun Disassmebled

This product is Nuskul Art Collectible Edition. Designed using 3D Max and Zbrush. -It is a detailed product that can be easily printed.

Follow me for more models You can send me a message about the model or in general. You can also reach me via social media.

Printing Settings

Print Temperature : : 205 Table Temperature : 60 Layer Height : 0.2 mm Intıal Layer Heigt : 0.2 mm Wall Line Count : 0.4 mm Fill Density : % 20

Support Settings

Support Stracture : Tree Maximum Branch Angle : 60 Branch Diameter : 3 Trunk Diameter : 16 Branch Diameter Angle : 5 Support Placement : Everywhere Prefferred Branch Angle : 25 Diameter İncrase to Model : 1 Minimum Height to Model : 3 Intial Layer Diameter : 6 Branch Destinty : 20 Tip Diameter : 0.8 Limit Branch Reach : Yes Optimal Branch Range : 30 Rest Preference : On Model if Required Support Overhang Angle : 55 Support Pattern : Gyroid Connect Support Lines : Yes Support Density : 5 Support Line Distance : 8 Intial Layer Support Line Distance :8 Support interface Thicknes : 1.2