Gogeta Fusion Reborn Soul Punisher LED Ready 3D print model

A beautifully crafted 3D model from the iconic Gogeta vs Janemba fight in the DragonBall Z: Fusion Reborn Movie.

This model has been specially made for 3D printing and includes a ready-made hollowed version to allow for inhouse LED cabling for that extra cool factor (check photos). This is great for an awesome home project!

When printed at 1:1 this model stands at exactly 34cm, this is to allow for optimal space when wiring. See further printing information below.

Printers: Designed for both FDM and Resin printers.

Energy sphere: For energy sphere it is advised to print with clear filament/resin then can be primed with clear primer and dipped in acrylic paint for an effect to match the anime.

Lighting: This has been designed to house a 5mm or smaller LED diode. These can be found very cheap from amazon, ebay, aliexpress etc. It is advised to buy a diode that already has a resistor attached, (most already do). Here is an example of the type of LED required which are very common to find:

https://www.aliexpress.com/item/1005006024317734.html?spm=a2g0o.productlist.main.5.3d5a30b4e9SZgz&algo_pvid=095b3420-2653-48e1-9748-3aeeca2a8e11&algo_exp_id=095b3420-2653-48e1-9748-3aeeca2a8e11-2&pdp_npi=4%40dis%21GBP%213.00%211.74%21%21%2126.61%21%21%402103890117049016970812573eb00d%2112000035370135400%21sea%21UK%212929426527%21&curPageLogUid=Y1CgesJVBdWx&utparam-url=scene%3Asearch%7Cquery_from%3A

This can then be soldered to any old USB cable for easy and convenient power supply to the LED, below is a short guide on how to do this:

https://www.youtube.com/watch?v=ztIQ1nbXxSI

Happy printing and please reach out if you have any questions :)