FRANKENSTEIN JUNIOR FAN ART CARICATURA 3D print model

3D PRINTING SETTINGSLayer Height: 0.05 - 0.1 mm (lower is better for fine details)Print Speed: 20 - 50 mm/s (slower for greater accuracy)Resin: Use high-quality resin for precise details and a smooth surface.Supports: Enable supports only if necessary to avoid complex part collapse.Exposure: Follow the manufacturer's recommendations for layer exposure time.Base Layers: 3-5 base layers to ensure adhesion to the platform.Resin Curing: Make sure to properly post-cure the resin, which may require the use of a UV lamp.FDM 3D Printing:

Layer Height: 0.1 - 0.3 mm (lower is better for fine details but slows down printing)Infill: 15% - 25% to save material without compromising strength.Print Speed: 40 - 80 mm/s (adjust based on desired details and precision).Extruder Temperature: Follow the manufacturer's recommendations for the specific filament you're using.Supports: Enable supports only if necessary.Bed Adhesion: Use adhesive tape, heated bed tape, or another method for secure adhesion.Cooling: Enable model cooling if needed to prevent edge curling.Remember that specific settings can vary based on your 3D printer, the printing material, and the exact model you're using. It's always a good idea to do initial tests and make any necessary adjustments to achieve the best results.