Eddie, the legendary mascot of Iron Maiden in the form of a statuetteI offer you a highly detailed statue of Eddie for 3D printing. the basis was taken from the print of Legacy of the Beast in a free interpretation. This work was born under the gentle melodies of heavy metal, I wanted to convey the dynamics and energy inherent in Iron Maiden.

In the package you will find:

1. a statuette with a stand in one mesh, if you want to print a small figure.
2. also separated the statue from the base
3. and separated by a hollow statuette for convenience of printing.
4. body with legs
5. head
6. hair
7. hands
8. feet
9. stand
10. guitar
11. monster head (Yes, it's skullcracker and Eddie defeated him))

The model was tested by me for 3D printing. The size of the model - 135х194х138 mm with stand. All parts has been printed FDM metod's 0,1 mm layers. See photos in the tape. What I used to print:

• simplify3d Slicer,
• 0.1 mm layer,
• optimize the location of the part (eg head and hair need to be put on top),
• manual placement of supports,
• low speed (50 mm/sec). If you are going to print on the printer LSD - there's no trouble at all. Everything will print perfectly.If you need help in the settings - write me a message, be sure to answer.

Subscribe to my page in instagram @hiropraktic, https://www.artstation.com/victorzolkin leave comments, it is very nice and well motivates for further work.I guarantee 100% support and advice in the future.