Cryptobiote with Base 3D print model

The Cryptobiote is a small creature from Death Stranding that the protagonist, Sam, consumes to restore his stamina.

This model includes three files: a cryptobiote, a split cryptobiote for easier printing, and a display base.

To attach and display the cryptobiote on the base, create small holes in both the base and the body, then use a piece of wire or a similar material of appropriate length to secure the connection.

The files are scaled to my size preference, but you may need to adjust the scale to fit your needs.

License: Private Use Only / No Commercial Use / No Derivatives

IMPORTANT: Do NOT share, redistribute, or sell these files under any circumstances—whether for free or commercially!

3D PRINTING SETTINGS

This model has been specifically tested using an Ender3 Pro 3D Printer with 0.4mm nozzle and PLA filament.

The following print settings were used:

Layer Resolution: 0.12mm (high quality) / 0.2mm (standard quality)

Filament: PLA

Printer Type: FDM

Nozzle Size: 0.4mm

The model prints very well with these settings and is recommended for use with PLA filament for optimal results.

** Supports are required. Please use the print settings that work best based on your experience.