Crimson Viper Street Fighter Female Chracter 3D Print 3D print model

There are 9 Stl Files in this Package. It is set as 2 modes according to printing style. Complete and Disassembled

COMPLATE 1-Base 2 - Full Figure 3 - Full Figure With Base

DISASSEMBLED PARTS 1- Head 2-Left Leg 3-Right Leg 4-Torso With Arms 5-Base 6-Hair

Complate Print: I recommend you to make precise support settings on the hair part. Since it is a standing pose, the product can be written easily.

Disassembled Print: Support is required in some places and is designed to be easily written. When printing the head model, I recommend that you turn the head part upside down and print it, as there are a lot of hair details.

The product was prepared with Z Brush and 3ds Max programs and fine adjustments were made in Mesh Mixer. It is completely a Nuskul Art product.

3D PRINTING SETTINGS Print Temperature : : 200 Table Temperature : 60 Layer Height : 0.2 mm Intıal Layer Heigt : 0.2 mm Wall Line Count : 0.4 mm Fill Density : % 20

Support Settings

Support Stracture : Tree Maximum Branch Angle : 60 Branch Diameter : 3 Trunk Diameter : 16 Branch Diameter Angle : 5 Support Placement : Everywhere Prefferred Branch Angle : 25 Diameter İncrase to Model : 1 Minimum Height to Model : 3 Intial Layer Diameter : 6 Branch Destinty : 20 Tip Diameter : 0.8 Limit Branch Reach : Yes Optimal Branch Range : 30 Rest Preference : On Model if Required Support Overhang Angle : 55 Support Pattern : Gyroid Connect Support Lines : Yes Support Density : 5 Support Line Distance : 8 Intial Layer Support Line Distance :8 Support interface Thicknes : 1.2

Follow me for more models You can send me a message about the model or in general. You can also reach me via social media.