Chamber of Dreams Barbarella and The Great Tyrant by SPARX 3D print model

Wanted to create that scene in the chamber of dreams with Barbarella/Jane Fonda and The Great Tyrant/Anita Pallenberg just before that almost kiss . . So following on my latest Movie Moments theme, here is the Fan Art by SparxBM.I have tried to keep costumes and sizes true to the movie with a few adjustments to allow the model to be split and printed . . . . .This Download is ONLY THE CHAMBER VERSION ALL PARTS ARE INCLUDED AS IN PICTURES TO CREATE A FULL MODEL AND BASE.

As previous an NSFW adult add-ons version is available to purchase separately, message me for details.

The torso’s and head parts are removable and interchangeable with magnets (see pics)

Based on Jane’s Measurements of 173cm Tall 36B–25–36 and Anita 170cm Tall 34B–22-34

Model is 1/6th scale therefore 343mm long, 153mm wide and 158 tall(with Horn Head) including Base.

Barbarella/Jane Fonda 1 upper torso Pose2 Left Arm1 Right Arm2 lower torso1 right boot1 left boot2 Head1 head stand

The Great Tyrant/Anita Pallenberg 1 upper torso Pose1 Left Arm1 Right Arm2 lower torso1 right foot1 left foot2 Head1 Head Horn2 Necklace pieces1 head stand

1 set link arms1 Dual Base FDM or larger printers1 head pin (print two)

27 items in total.

PURCHASE OF THESE FILES DOES NOT ALLOW SELLING STL FILES OR MODELS MADE FROM THE FILES. . . DOWNLOAD IS FOR SINGLE BUYER USE ONLY

I SHARE MY WORK FOR OTHERS TO ENJOY. . .PLEASE DO NOT SHARE THESE FILES ON SOCIAL MEDIA OR OTHER WEBSITES. LINKS TO THIS PAGE ARE ACCEPTED

All parts are cut files to fit build plate of small resin printers like the Photon or have separate files than the FDM versions included.These orientations work for FDM printing but you may find a better orientation that reduces support.All the parts have been printed and developed to print, A lot of prints have been produced to get the figures corrected and fault free.

Why cut into many smaller parts I have been asked?

1. If you try and assemble this, then paint it . .it would be difficult to paint into hidden areas, less masking when painting separate parts.
2. Smaller parts not only allow for Resin print at full scale, but also allow individual parts to use less supports than one larger part on FDM printersSo now you know!Please do not scale down or adjust my recommended settings for infill etc. . . as you can see from the pictures this prints very well and I believe you will be pleased with the result when completed.All of my models are only released when they can print! so please do not remix or fix faults in this model then republish! If there is a fault then let me know . . message me I will answer and fix problem. . apart from that print make enjoy.

3D PRINTING SETTINGS

It is advised to assemble in groups of parts as per assembly instructions.Resin Printing;Hollow 2.40 Raft 95%Torso’s Legs, Boots and Feet

Hollow 2.70 Raft 110%Head’s

DO NOT HollowArms, horn or Necklace parts

FDM Necklace parts and horn 80% fill 0.12 speed 40Rest at 0.16 30% fill, speed 50

ALWAYS dry assemble and “trim” parts prior gluing.Look at the picture of how to assemble parts, so that you construct and paint upper and lower parts for both figures separate before joining. ..